Academics

Direct Ph.D./Ph.D.

Ph.D. :
Program The Department of Applied Mechanics & Biomedical Engineering offers selected candidates the opportunity to pursue doctoral level research leading to the Ph.D. degree. The Ph.D. candidate carries out research work in one of the research areas of interest (specialization) of the Department under the guidance of a faculty member.

A few research scholars sponsored by recognized R&D organizations are also admitted to pursue the MS/PhD programs. Most of them carry out the major part of their research work as External Research Scholar in their own organizations


Syllabus for M.S./Ph.D. Interviews (D Ph.D. syllabus is same as M.S.)
Guide Allocation Policy

M.S.

Master of Science Program


The M.S. program of IIT Madras is the Masters level research program carried out under the guidance of a faculty member of the respective Department.

The student (called Research Scholar (RS)) undertakes a few courses with a view to better understand the broad areas of his research work. On successfully completing the research work and producing the work in a thesis, the student earns the MS degree. The quality of the MS thesis is such that research publications usually result from them.


Syllabus for M.S./Ph.D. Interviews

Guide Allocation Policy

IDDD

5-Year Dual Degree Program


This program enables an engineering student to develop skills that help him to acquire and apply new scientific knowledge from diverse engineering fields. With this foresight and by virtue of its interdisciplinary composition, the Department of Applied Mechanics & Biomedical Engineering, IIT Madras has introduced a unique interdisciplinary Dual Degree Program along with the Departments of Aerospace Engineering, Civil Engineering, Electrical Engineering and Ocean Engineering.


On successfully completing 5 years, the students of this program earn dual degrees:

  •  B.Tech. in Aerospace/Civil/Electrical/Ocean Engineering and
  •  M.Tech. in Applied Mechanics & Biomedical Engineering with appropriate specialization.



M.Tech.

2-Year M.Tech. Program


This program brings together the broad disciplines of Solid Mechanics, Fluid Mechanics & Biomedical Engineering into a single fold with specialization in respective areas. Candidates from a wide range of Engineering disciplines (see table) are eligible to apply.

The first semester is common for all students. Based on the performance in the first semester and their individual preference, students will be allotted 4 HTTA fellowships in each of the three specialization groups. In the second year, the students will work on a research project in the area of specialization, which they have chosen. Curriculum Details



M.Tech. Curriculum (for students admitted from 2017 academic year onwards)




M.Tech. Curriculum (for students admitted in 2015 and 2016)



Specialisation Core / Laboratory



Electives
Course Number Course Name Credits
AM5000 Ergonomics (Presently AM600) 3
AM5030 Medical Physics 3
AM5070 Medical Systems and Control 3
AM5100 Bio medical Laser Instrumentation 3
AM5110 Bio Fluid Mechanics 3
AM5110 Bio Fluid Mechanics 3
AM5120 Bio Materials 3
AM5150 Bio Dynamics 3
AM5170 Orthopaedic Mechanics 3
AM5210 Approx. Methods in Engineering Analysis 3
AM5220 Theory of Visco Elasticity 3
AM5250 Theory of Plasticity 3
AM5260 3-Dimensional Problems in Theory of Elasticity 3
AM5280 Advanced Experimental Techniques 3
AM5290 Dynamics of Structures 3
AM5300 Engineering Plasticity 3
AM5300 Stability of Structures 3
AM5320 Non-Linear Stress Analysis 3
AM5330 Wave Pro 3
AM5340 Stochastic Processes in Structural Mechanics 3
AM5350 Analysis of Pressure Vessels 3
AM5360 Composite Structures 3
AM5380 Approx. Methods in Structural Mechanics 3
AM5410 Theory of Plates 3
AM5430 Boundary Element Methods 3
AM5440 Engineering Fracture Mechanics 3
AM5500 Theory of Shells 3
AM5640 Turbulence Modeling 3
AM6550 Advanced Gas Dynamics 3
AM6560 Turbulent Boundary Layers 3
AM6570 Flow Induced Vibrations 3
AM 6580 Wind Engineering 3
AM6590 Turbulent Shear Flows 3
AM5410 Thermal & Compressible Boundary Layers 3
ID6010 Constitutive Modeling in Continuum Mechanics 3
Any other M.Tech. Level Course with the approval of HOD



Joint Degree Programs


For the Academic Year 2021-2022 and onwards, the Joint Degree Program at IIT Madras will be coordinated by the Department of Applied Mechanics(https://apm.iitm.ac.in/) & Biomedical Engineering Group (https://apm.iitm.ac.in/bio_medical.html).

A Joint Degree Programs by:
  • Indian Institute of Technology Madras (IITM)
  • Sree Chitra Tirunal Institute for Medical Sciences & Technology Trivandrum (SCTIMSTT)
  • Christian Medical College Vellore (CMC)



The M.Tech. in Clinical Engineering Curriculum and the Ph.D. (major: Biomedical Devices and Technology) Curriculum programmes aim to develop capable people, who will go further to make significant contributions as high-level engineers, researchers, entrepreneurs, academicians, etc. in the relevant areas. It is a unique undertaking and exploits the innate strengths and facilities of the three institutes — SCTIMST, IITM and CMC. These organizations together hold strong backgrounds in Technology, Biomedical Engineering and Medical Sciences.

For Eligibility and Admissions details:


Participating Institutes:
  • Indian Institute of Technology Madras (IITM)
  • Sree Chitra Tirunal Institute for Medical Sciences & Technology Trivandrum (SCTIMSTT)
  • Christian Medical College Vellore (CMC)



Coordinators:
  • Prof. Arun Thittai, Department of Applied Mechanics & Biomedical Engineering, IIT Madras (akthittai@iitm.ac.in)
  • Dr. Roy Joseph, Division of Polymeric Medical Devices, Biomedical Technology Wing, SCTIMST Trivandrum (rjoseph@sctimst.ac.in)
  • Prof. Sivakumar Balasubramaian, Department of Bioengineering, CMC Vellore (siva82kb@cmcvellore.ac.in)


M.Tech. Clinical Engineering
The selection will be done once a year on an all-India basis, through a centralized M.Tech. admission process conducted by IIT Madras. For selection and admission details http://mtechadm.iitm.ac.in/.The M.Tech. programme will be two years duration. The students will study and train at all the three participating Institutes.

The M.Tech. (Clinical Engineering) programme (MCE) has an innovative approach of combining formal engineering training with hands-on clinical exposure. It is a unique undertaking and will exploit the innate strengths and facilities of the three institutes – SCTIMST, IITM and CMC. These organizations together hold strong backgrounds in Technology, Biomedical Engineering and Medical Sciences.

The selection will be done once a year on an all-India basis, through a centralized M.Tech. admission process conducted by IIT Madras. For selection and admission details http://mtechadm.iitm.ac.in/ The M.Tech. programme will be two years duration. The students will study and train at all the three participating Institutes.


Placement Scenario
The placement opportunities are excellent in hospitals as well as in biomedical device companies. The scope for higher studies (Ph.D.), both in India and abroad, is also bright. All the students who have graduated thus far from the program have been placed through the placement offices and efforts at IIT Madras and SCTIMST. They have been placed in hospitals, medical device industries, and some have opted to go for a Ph.D., typically abroad.



Ph.D. Biomedical Devices and Technology
The aim of this programme is to train engineers to carry out research and development in the field of biomedical devices and technology. This training would enable them

To be leaders in research and development
To be innovators and entrepreneurs in biomedical technology
The students will study and train at all the three participating Institutes.



Application Procedure
The selection will be done once a year on an all-India basis, through a screening test and/or a personal interview of eligible candidates. If needed, the syllabus for the screening test will be sent to eligible candidates well before the test.

Interested candidates can apply for the JDP Ph.D. (Biomedical Devices and Technology) program through the IIT Madras Research Admissions https://research.iitm.ac.in/Online Portal for the Department of Applied Mechanics & Biomedical Engineering, IIT Madras.

It may be helpful to note that the selected candidates who join the program will work on a thesis with two guides – one from any Department at IIT Madras, and the other, a suitable collaborator, by mutual agreement between the guides, from either SCTIMST or CMC. Thus, the student will have a significant choice in the thesis topic.